Faults; Functions; Information; Programmer Setup - Club Car Electric Precedent 2008 Maintenance And Service Manual

13

Monitor Menu

FAULTS

The faults menu displays all faults recorded by the speed controller since the history was last cleared. Each fault is
listed only once, even if the fault has occurred multiple times. See Faults Menu on page 13-7.

FUNCTIONS

The functions menu allows the user to transfer all current settings from the speed controller to the handset and from
the handset to the speed controller. See Functions Menu on page 13-13.

INFORMATION

The information menu displays the model number, serial number, manufacturer date and software version of the speed
controller. See Information on page 13-16.

PROGRAMMER SETUP

The programmer setup menu allows the user to set the LCD contrast, display the fault history of the programmer as
well as various other information pertaining to the handset such as model number, serial number, OEM information,
etc. See Programmer Setup on page 13-16.
MONITOR MENU
The monitor menu is accessed by using the up or down arrow to scroll to monitor and pressing the right arrow key
to activate the menu. All information in the monitor menu is updated in real time, allowing the trained technician to
troubleshoot the vehicle by monitoring the handset as the key switch is cycled, Forward/Reverse switch is activated, etc.
Since the monitor menu is updated while the vehicle is in operation, the trained technician has the ability to monitor
the status of several components in conditions or locations where a problem with vehicle performance has been
reported. See following WARNING.
WARNING
• The vehicle operator should not monitor the handset while the vehicle is in motion. A technician
can monitor the handset while traveling as a passenger in the vehicle. Failure to heed this warning
could result in severe personal injury or death.
The following parameters can be monitored in real time with the handset from the monitor menu:

THROTTLE

Indicates the position of the accelerator pedal from 0% (pedal not pressed) to 95 - 100% (pedal fully pressed). This
item can be monitored when the key switch is in the ON or OFF position.
Page 13-4 2008 Electric Precedent Maintenance and Service Manual
IQ DISPLAY MODULE (IQDM) AND IQDM-P
DIAGNOSTICS: IQ SYSTEM