B+K precision 4075B User Manual page 96

The positive transition filter enables a bit in the event register to be set when a condition changes from
false to true. The negative transition register enables a bit in the event register to be set when a
condition changes from true to false. In order for the bit in the event register to be set, the
corresponding bit in the transition register must be set.
Bit 3 in the status byte will be set if a bit in the event register is set while the corresponding bit in the
enable register is set.
Questionable Condition
:STATus:QUEstionable:CONDition?
This query is used to read the condition register.
Command Type:
Query
Syntax:
Response:
Positive Transition Filter
:STAT:QUES:PTR
This command is used to set and query the value of the positive transition filter.
Arguments
Type:
Range:
Command Type:
Setting
Syntax:
Examples:
Query
Syntax:
Response:
Negative Transition Filter
:STAT:QUES:NTR
This command is used to set and query the value of the negative transition filter.
Arguments
Type:
Range:
1.800.544.2843
Query only
:STATus:QUES:COND?
NR1
NRf
0 to 131,072. Non integer arguments are rounded before execution.
Setting or Query
:STAT:QUES:PTR<ws><NRf>
:STAT:QUES:PTR 2048
:STAT:QUES:PTR?
NR1
NRf
0 to 131,072. Non integer arguments are rounded before execution
www.calcert.com
15
10 20
5 25
0 30
83
sales@calcert.com