Table of Contents
Advertisement
Command Errors
A command error is in the range -199 to -100, and indicates that a syntax error was detected. This
includes the case of an unrecognized header. The occurrence of a command error causes the CME bit
(bit 5) of the Standard Event Status Register to be set.
-100
-101
-102
-103
-104
-105
-108
-109
-110
-111
-112
-114
-113
-120
-121
-123
-124
-128
-131
-134
-138
-140
-141
-144
-148
-158
-161
-168
1.800.544.2843
Command Error
Invalid character
Syntax error
Invalid separator
Data type error
GET not allowed
Parameter not allowed
More parameters than allowed were received
Missing parameter
Fewer parameters than necessary were received
Command header error
Header separator error
Program mnemonic too long
The mnemonic must contain no more than 12 characters.
Header suffix out of range; Only suffix of 1 or 2 is valid, indicating the
channel being operated.
Undefined header
Numeric data error
Invalid character in number
Exponent too large
IEEE 488.2 specifies maximum of 32000
Too many digits
IEEE 488.2 specifies maximum of 255 digits in mantissa.
Numeric data not allowed
A different data type was expected
Invalid suffix
Suffix too long
A maximum of 12 characters are allowed in a suffix.
Suffix not allowed
Character data error.
Invalid character data.
Incorrect character data were received.
Character data too long
Character data may contain no more than 12 characters.
Character data not allowed
String data not allowed
Invalid block data
An error was found in the block data
Block data not allowed
45
www.calcert.com
15
10
20
5
25
0
30
sales@calcert.com
Advertisement
Table of Contents
