B+K precision 4075B User Manual page 76

FSK SOURce
This command selects the FSK modulation source as either internal (then the above settings are
effective) or external (and then the external waveform determines the frequency of modulation).
Arguments
Type:
Options:
Command Type:
Setting
Syntax:
Examples:
Query
Syntax:
Response:
Sweep control
The following commands control the sweep functionality:
Sweep STATe
This command activates or deactivates sweep:
Arguments
Type:
Command Type:
Setting
Syntax:
Examples:
Query
Syntax:
Response:
Sweep SPACing
This command sets the sweep spacing as either LINear or LOGarithmic:
Arguments
Type:
Options:
Command Type:
Setting
Syntax:
Examples:
1.800.544.2843
Character
INTernal, EXTernal
Setting or Query
[:SOURce:] FSK:SOURce<ws><INT|EXT>
FSK:SOUR INT
FSK:SOUR EXT
[:SOURce]:FSK:SOURce?
INT|EXT
Boolean
Setting or Query
[:SOURce:]SWEEP[:STATe]<ws>ON|1|OFF|0
SWEEP:STAT ON
SWEEP OFF
[:SOURce:]SWEEP[:STATe]?
0|1
Character
LINear, LOGarithmic
Setting or Query
[:SOURce:] SWEEP:SPACing<ws><LIN|LOG>
[:SOURce:] SWEEP:SPACing LIN
SWEEP:SPAC LOG
www.calcert.com
15
10 20
5 25
0 30
63
sales@calcert.com