B+K precision 4075B User Manual page 66

:FM
:FSK
:SWEep
:PHAse
:PULSe
Frequency
:SOURce:FREQuency <frequency>
The frequency command controls the frequency of the output waveform.
Arguments
Type:
Units:
Range:
1.800.544.2843
[:STATe] <Boolean>
:DEPTh <numeric value>
:SHAPe SINusoid|SQUare|TRIangle
:FREQuency <numeric value>
:SOURce INTernal |EXTernal
[:STATe] <Boolean>
:DEViation <numeric value>
:SHAPe SINusoid|SQUare|TRIangle
:FREQuency <numeric value>
:SOURce INTernal |EXTernal
[:STATe] <Boolean>
:LOWFrequency <numeric value>
:HIFrequency <numeric value>
:RATE <numeric value>
:SOURce INTernal |EXTernal
STATe <Boolean>
:SPACing <LIN|LOG>
:TIME <numeric value>
:STARt <numeric value>
:STOP <numeric value>
[:ADjust] <numeric value >
SYNChronize
:PERiod <numeric value >
:WIDth <numeric value >
:EDGe <numeric value >
:RISe <numeric value >
:FALl <numeric value >
Numeric.
MHz, KHz, Hz (default)
Dependent on the Point Rate and Wavelength.
Fmax = 1/(5 ns * Wavelength)
www.calcert.com
15
10 20
5 25
0 30
53
sales@calcert.com