Table of Contents
Advertisement
The data value governs the output amplitude of that point of the waveform, scaled to the instrument
output amplitude. Therefore, a value of 8191 corresponds to positive peak amplitude, 0 corresponds to
the waveform offset, and -8191 corresponds to the negative peak amplitude. The following menu
displayed:
F1: Point
F2: Line
F3: Predef
1.800.544.2843
Figure 3.7 - Edit Menu
- This menu allows point by point waveform editing. When selected, the following
menu is displayed:
Figure 3.8 - Point Editing Menu
F1: Adrs
- Select the current address in the arbitrary waveform memory.
F2: Data
- Selects the data point value at the current address. You can change the
point value from -8191 to 8191.
F5: Prev
- Returns to the previous menu (Edit menu).
- This menu allows a line drawing between two selected points. When selected, the
following menu is displayed:
F1: From
- Selects the starting point address.
F2: To
- Selects the ending point address.
F4: Prev
- Displays the Confirmation menu, F1: NO and F3: YES.
F5: Prev
- Returns to the previous menu (Edit menu).
- (Predefined Waveforms) Selects one of the predefined waveforms.
www.calcert.com
15
10
20
5
25
0
30
15
sales@calcert.com
Advertisement
Table of Contents
