B+K precision 4075B User Manual page 83

This command is used to select the trigger source, for use in the Trigger, Gate and Burst trigger modes.
Arguments
Type:
Options:
Command Type:
Setting
Syntax:
Examples:
Query
Syntax:
Response:
Burst Count
:TRIGger:BURSt <burst count>
Used to set the number of cycles to be output in the BURST mode. It is not a standard SCPI command.
Arguments
Type:
Range:
Rounding:
Command Type:
Setting
Syntax
Examples
Query
Syntax:
Response:
Examples:
Internal Trigger Rate
:TRIGger:TIMer <trigger rate>
Sets the rate of the internal trigger.
Arguments
1.800.544.2843
Character
MANual - Front panel MAN key
BUS - GPIB trigger (GET or *TRG)
INTernal - Internal trigger
EXTernal - External trigger
Setting or Query
:TRIGger:SOURce<ws><option>
:TRIG:SOUR BUS
:TRIG:SOUR INT
:TRIGger:SOURce?
MAN|BUS|INT|EXT
Numeric
2 to 999999
To integer value
Setting or Query
:TRIGger:BURSt<ws><value>
:TRIG:BURS 100
:TRIG:BURS MAXIMUM
:TRIGger:BURSt?[<ws>MAXimum|MINimum]
NR1
:TRIG:BURST?
:TRIG:BURS? MAX
www.calcert.com
15
10 20
5 25
0 30
70
sales@calcert.com