Table of Contents
Advertisement
F4: More
F5: Prev
Copy Function - Copies an area of waveform memory to another area of waveform memory.
Clear Function - Clears (sets the data values to zero) either a section of or all of waveform memory.
1.800.544.2843
Figure 3.10 - Scale Menu
F5: Exec
- Prompts you to confirm whether to execute the selected predefined
waveform. Press NO to abort executing the predefined waveform; press
YES to execute the predefined waveform. On the NOISE function a menu
of ADD and NEW is prompted to select a new noise waveform or to add
noise to the existing waveform.
- Displays the following Menu:
F1: Copy
- Displays the Copy menu (see the Copy Function later in this section).
F2: Clear
- Displays the Clear menu (see the Clear Function later in this section).
F3: Prot
- Displays the Protect menu (see the Protect Function later in this
section).
F4: Show Wave - Display the Arbitrary waveform in full screen mode on LCD display.
This is only an approximated display for quick viewing. It does not represent the exact
waveform being generated. To return back to the MENU selection, press any button.
- Returns to the previous menu.
F1: From
- Selects the address of the first point to copy.
F2: Leng
- Selects the length (number of points) of the waveform to copy.
F3: To
- Selects the destination address where the first point is copied.
F4: Exec
- Prompts to confirm to copy data. Press NO to abort copying, YES to copy.
F5: Prev
- Returns to previous menu.
F1: From
- Selects the address of the first point to clear.
F2: To
- Selects the address of the last point to clear.
F3: All
- Clears the whole waveform memory.
F4: Exec
- Prompts to confirm to clear data. Press NO to abort clearing, YES to
clear.
F5: Prev
- Returns to previous menu.
www.calcert.com
15
10
20
5
25
0
30
17
sales@calcert.com
Advertisement
Table of Contents
