B+K precision 4075B User Manual page 78

Arguments
Type:
Units:
Range:
Rounding:
Command Type:
Setting
Syntax:
Examples:
Query
Syntax:
Examples:
Response:
Phase Adjust
[:SOURce:]PHASe<ws><phase>
This command controls the phase adjustment
Arguments
Type:
Units:
Range:
Rounding:
Command Type:
Setting
Syntax:
Examples:
Query
Syntax:
Response:
Pulse Setting
The following commands control the pulse function:
Note that width + 0.6 x (rise + fall) < period in order to have valid values.
PULSe PERiod
This command sets the pulse period to the specified value.
Note: This also sets the pulse frequency.
1.800.544.2843
Numeric.
MHz, KHz, Hz (default)
Dependent on the frequency range of the current function.
The value is rounded to 4 digits.
Setting or Query
[:SOURce:]SWEEP:STOP<ws><frequency>[units]
[:SOURce:]SWEEP:STOP<ws>MINimum|MAXimum
SWEEP:STOP 5KHZ
SWEEP:STOP 5E3
SWEEP:STOP MAXIMUM
SWEEP:STOP MIN
[:SOURce:]SWEEP:STOP?[<ws>MAXimum|MINimum]
SWEEP:STOP ?
SWEEP:STOP ? MAX
NR3
Numeric
one (degrees implied)
-180 to +180 (other values converted to this range)
to integer
Setting or Query
[:SOURce:]PHASe<ws><phase>
[:SOURce:]PHASe<ws>MINimum|MAXimum
[:SOURce:]PHASe 500
[:SOURce:]PHASe?[<ws>MINimum|MAXimum]
NR3
www.calcert.com
15
10 20
5 25
0 30
65
sales@calcert.com