B+K precision 4075B User Manual page 87

ASCII, it is recommended that data be read in chunks not exceed 10,000 points at a time. For Binary,
it is recommended that data be read in chunks not exceeding 100,000 points at a time.
Writing waveform data:
It is recommended that waveform data be sent in chunks not exceeding 10,000 points at a time when
writing data into the instrument's arbitrary memory.
Line Draw
:ARBitrary:DRAW <start address>,<end address>
This command is used to generate a straight line between two points in the arbitrary waveform
memory.
Arguments
Type:
Range:
Rounding:
Command Type:
Setting
Syntax:
Example:
Considerations:
1) The value of the data at the start and end points must first be set by the user, using the
2) The range of the straight line cannot overlap with protected memory.
3) The end address must be greater than the start address.
Clear
:ARBitrary:CLEar <start address>,<end address>
This command is used to clear all or a portion of waveform memory. The memory is the set to the value
zero.
Arguments
Type:
Numeric Range:
Rounding:
Command Type:
Setting
Syntax:
Examples:
Considerations:
1.800.544.2843
Numeric.
1 to 16,777,216
to integer value
Setting only
:ARBitrary:DRAW<ws><start address>, <end address>
:ARB:DRAW 1,1000
:ARB:DATA command.
Numeric.
1 to 16,777,216
to integer value
Setting only
:ARBitrary:CLEar<ws><start address>, <end address>
:ARB:CLE 1,1000
www.calcert.com
15
10 20
5 25
0 30
74
sales@calcert.com