B+K precision 4075B User Manual page 80

Syntax:
Response:
PULse RISe
This command sets rising edge of the pulse to the specified value.
Arguments
Type:
Units:
Range:
Rounding:
Command Type:
Setting
Syntax:
Examples:
Query
Syntax:
Response:
PULse FALl
This command sets falling edge of the pulse to the specified value.
Arguments
Type:
Units:
Range:
Rounding:
Command Type:
Setting
Syntax:
Examples:
Query
Syntax:
Response:
Duty Cycle
:SOURce:DCYCle <duty cycle value>
This command is used to set the duty-cycle of the square wave or the symmetry of triangular wave. The
value is given in percent and the maximum and minimum are frequency dependent.
1.800.544.2843
[:SOURce:] PULse:EDGe?[<ws>MINimum|MAXimum]
NR3
Numeric
S, mS, uS, nS
100 nS minimum; maximum defined by period and width (see note above)
4 digits
Setting or Query
[:SOURce:] PULse:RISe <ws><phase>
[:SOURce:] PULse:RISe <ws>MINimum|MAXimum
[:SOURce:] PULse:RISe 500NS
[:SOURce:] PULse:RISe?[<ws>MINimum|MAXimum]
NR3
Numeric
S, mS, uS, nS
100 nS minimum; maximum defined by period and width (see note above)
4 digits
Setting or Query
[:SOURce:] PULse:FALl <ws><phase>
[:SOURce:] PULse:FALl <ws>MINimum|MAXimum
[:SOURce:] PULse:FALl 500NS
[:SOURce:] PULse:FALl?[<ws>MINimum|MAXimum]
NR3
www.calcert.com
15
10 20
5 25
0 30
67
sales@calcert.com