B+K precision 4075B User Manual page 88

1) The clear range cannot overlap with protected memory.
2) The end address must be greater than the start address.
Copy
:ARBitrary:COPY <start address>,<length>,<destination address>
This command is used to copy a section of the waveform to a different location in waveform memory.
Arguments
Type:
Range:
Rounding:
Command Type:
Setting
Syntax:
Example:
Considerations:
1) The destination range cannot overlap with protected memory.
2) The destination range cannot overlap with the source range.
3) The destination end address may not exceed the maximum address:
Start address + Length - 1 <= 16,777,216
Destination address + Length - 1 <= 16,777,216
Memory Protection Range
:ARBitrary:PROTect [:RANGe] <start address>,<end address>
This command is used to define a range of arbitrary waveform memory to be write-protected. The
protection is effective only if the PROTect:STATe is ON.
Arguments
Type:
Numeric Range:
Rounding:
Command Type:
Setting
Syntax:
Examples:
Query
Syntax:
Response:
1.800.544.2843
NRf
1 to 16,777,216
to integer value
Setting only
:ARBitrary:COPY<ws><start>,<length>,<destination>
:ARB:COPY 1,1000,1001
Numeric.
1 to 16,777,216
to integer value
Setting or Query
:ARBitrary:PROTect[:RANGe]<ws><start>,<end>
:ARB:PROT 1,1E3
:ARBitrary:PROTect[:RANGe]?
<protect start>,<protect end> in NR1 format.
www.calcert.com
15
10 20
5 25
0 30
75
sales@calcert.com