B+K precision 4075B User Manual page 92

Arguments
Type:
Range:
Rounding:
Setting
Syntax:
Examples:
Query
Syntax:
Example:
Response:
Considerations:
Marker Length
:ARBitrary:MARKer:LENGth <numeric value>
This command is used to set the marker length. The marker length is specified by appending a numeric
value, to the MARKer keyword.
Arguments
Type:
Range:
Command Type:
Setting
Syntax:
Example:
Query
Syntax:
Response:
Marker State
:ARBitrary:MARKer:STATe <Boolean>
This command is used to enable or disable the marker.
Arguments
Type:
Command Type:
Setting
Syntax:
1.800.544.2843
Numeric.
1 to 16,777,216
to integer values
:ARBitrary:MARKer[:ADDRess]<ws><marker address>
:ARB:MARK 45
:ARBitrary:MARKer[:ADDRess]?
:ARB:MARK?
Marker address in NR1 format
The marker is only output if its address is within the range of addresses currently
being run.
Numeric
1 to 4,000
Setting or Query
:ARBitrary:MARKer:LENGth<ws><length>
:ARB:MARK:LENG 5
:ARBitrary:MARKer:LENGth?
NR1
Boolean
Setting or Query
:ARBitrary:MARKer:STATe<ws>ON|1|OFF|0
www.calcert.com
15
10 20
5 25
0 30
79
sales@calcert.com