Table of Contents
Advertisement
Note: Changing one of the arbitrary parameters as start and length causes an update of the output
waveform to the new parameters. When exiting the Arbitrary Menu by selecting a different waveform,
a message to save the Arbitrary wave will be displayed. Select YES or NO to save the new waveform.
This save functions the same as the SAVE ARB function.
Arbitrary EDIT Menu
Enters data for creating arbitrary waveforms. You can enter data one point at a time, as a value at an
address, draw a line from one point (a value at an address) to another point, create a predefined
waveform, or combine these to create complex waveforms. The valid data values range is -8191 to
8191. The valid waveform memory addresses range from 1 to maximum memory length of instrument.
1.800.544.2843
Arbitrary waveform
from front panel
channel output
5 V TTL signal output
from rear Marker Out
connector
F4: Edit
- Refer to the Arbitrary EDIT Menu section below for details.
F5: Prev
- Back to previous menu.
www.calcert.com
15
10
20
5
25
0
30
Start Address
Markers
Figure 3.6 - Arb Saving Menu
14
Length
5 V
0
sales@calcert.com
Advertisement
Table of Contents
