•
Simultaneously touch the < / > sensors.
•
Touch MENU repeatedly to select the ton (tone). The display will be flashing ton 1.
•
Use the < / > sensors to select your preferred tone:
- use > to select the setting 1 to 3,
•
- use > to select the setting 3 to 1.
Adjust display brightness
You can adjust display brightness 1 to 9, where 1 is the darkest and 9 is the brightest. The brightness
setting applies to an inactive control panel, i.e. when no controls are touched for 7 seconds. You can
adjust display brightness as follows:
•
Simultaneously touch the < / > sensors.
•
Touch MENU repeatedly to select the bri (brightness) setting — the settings can be accessed
in sequence ton (tone) and bri (brightness).
•
Use the < / > sensors to select your preferred brightness:
- use > to select the setting 1 to 9,
- use < to select the setting 9 to 1.
NOTE:
The display is at its brightest setting when active, i.e. a control was touched within the last 7 seconds.
Night Mode
The display is dimmed during the night hours 22:00 — 06:00.
FAN ASSISTED OVEN
Oven with automatic air circu-lation (including a fan
and ring heater)
The oven can be warmed up using the bottom and top
heaters, as well as the grill. Operation of the oven is
controlled by the oven function knob – to set a required
function you should turn the knob to the selected
position,
as well as the temperature regulator knob – to set a
required function you should turn the knob to the selected
position.
EN
43