Chapter 5. Usage - Kernau KBO 1067 SK B Operation Manual

Before you first use your appliance:
• Remove packaging, clean interior from any residual preservation substances.
• Remove any accessories and wash them in warm water with detergent.
• Turn on ventilation or open a window.
• Turn the function knob into top+bottom or ring heater+fan function (see: Function selector
and oven control).
• Perform an initial burn in (250°C, 30 minutes), remove any dirt and clean thorothoroughly.
ATTENTION:
If the oven is equipped with electronic timer, it will display flashing 0:00 time after firstly plugging it in.
Current time should be programmed (see- Timer instruction manual attached to this document). Oven
will not operate without the time set.
IMPORTANT :
Electronic timer is equipped with touch sensors which are operated by touching marked places on the
control panel. Every registered touch is indicated by a sound. Sensor surfaces should be kept clean.
IMPORTANT :
Oven cavity should be cleaned only with warm water with washing-up liquid.

CHAPTER 5. USAGE

EN 40