Connecting To Mains - Kernau KBO 1067 SK B Operation Manual

ATTENTION:
Appliance should be mounted when it is disconnected from the mains!

CONNECTING TO MAINS:

Before conducting any works, please refer to the rating plate.
• This oven is designed to be powered by alternating current 230V 50Hz and is equipped with
power cable 3x1,5 mm2, 1,5 m long ended with a grounded plug.
• Electrical socket must be properly grounded. After the oven is fully mounted, the plug should
be easily accessible.
• Before plugging the oven into the socket, please check:
- Whether wiring can deliver proper power and the fuse is 16A rated.
- Whether the electrical system is properly grounded, according to local laws.
The plug should be easily accessible after mounting!
WARNING:
If the power cord is damaged, it should be replaced by properly trained personnel to avoid hazard.
39
EN