LINET Multicare LE Instructions For Use And Technical Description page 41

Activating GO Button
The button activates the keyboard of all control elements for 3 minutes.
The function of the GO button is identical on all control elements.
During this time the following is possible:
► Adjusting individual mattress support platform elements by pressing the corresponding function buttons.
► Disabling individual functions with the lock buttons.
Each time a function button is pressed, the keyboard will remain active for another 3 minutes.
Function Buttons
The function buttons are indicated by numbers 4, 5, 7, 8, 10, 11, 12, 15, 16 and 17.
NOTE
Pressing two function buttons at the same time will be recognized as an error by the controller. The controller will interrupt
immediately all bed movements and display shows alert.
Lock
To lock Backrest Adjustment:
► Press button 2.
Corresponding LED on Attendant Control Panel is lit.
Backrest Adjustment is disabled using any Control Element.
To lock Thighrest, Calfrest and Bed Extension Adjustment:
► Press button 1.
Corresponding LED on Attendant Control Panel is lit.
Thighrest, Calfrest and Bed Extension Adjustment are disabled using any Control Element.
To lock Bed Height, Lateral Tilt, Trendelenburg Tilt and Antitrendelenburg Tilt Adjustment:
► Press button 3.
Corresponding LED on Attendant Control Panel is lit.
Bed Height, Lateral Tilt, Trendelenburg Tilt and Antitrendelenburg Tilt Adjustment are disabled using any Control Element.
Unlock
To unlock Backrest Adjustment:
Press button 2.
►
Corresponding LED on Attendant Control Panel is not lit.
Backrest Adjustment is enabled again.
To unlock Thighrest, Calfrest and Bed Extension Adjustment:
► Press button 1.
Corresponding LED on Attendant Control Panel is not lit.
Thighrest, Calfrest and Bed Extension Adjustment are enabled again.
To unlock Bed Height, Lateral Tilt, Trendelenburg Tilt and Antitrendelenburg Tilt Adjustment:
► Press button 3.
Corresponding LED on Attendant Control Panel is not lit.
Bed Height, Lateral Tilt, Trendelenburg Tilt and Antitrendelenburg Tilt Adjustment are enabled again.
MAINS POWER LED
Status
lit LED
unlit LED
flashing LED
D9U001MC5-0101_08
Meaning
connected to the mains
disconnected from the mains
system error
1 2 3
2
1 3
41