Table of Contents
Advertisement
Operating in Inverter Mode
The Freedom HF is in inverter mode when shore power is not
presently available and the unit is using the battery (by inverting
DC to AC) to power the appliances connected to the Freedom HF.
The Yellow status LED lights up to indicate the Freedom HF is
using the battery to power the appliances.
The table on the next page illustrates the battery status during
inverter mode as shown on the display panel.
Inverter Mode Setting is ON
("Standby")
When the Freedom HF's Inverter mode setting is turned on ("1n1")
and the AC source is outside the operating range or is
disconnected, the transfer switch automatically switches to
inverter function. This means that the AC output terminals will
provide power from the battery and any appliance connected to
the AC output terminals will operate.
975-0390-01-01
Turning the Inverter Function On
and Off
The Inverter Power button on the display panel turns the Freedom
HF's Inverter function ON and OFF. To operate, press the button
and hold for one second.
When shore power is NOT present and Inverter mode is ON:
the AC outlets will supply power to any attached appliances
n
when the Inverter Power button is turned ON and
the AC outlets will not supply power to any attached
n
appliances when the Inverter Power button is turned OFF
ELECTRICAL SHOCK HAZARD
Turning the Inverter mode setting to OFF and/or turning the Inverter
Power button off do not disconnect DC battery power from the
Freedom HF. You must disconnect both AC and DC power before
working on any circuits connected to the Freedom HF.
Failure to follow these instructions can result in death, serious
injury, or equipment damage.
To prevent unnecessary battery discharge, turn the Inverter
Power button off when you are not using the Freedom HF.
Operating in Inverter Mode
WARNING
31
Advertisement
Table of Contents
Troubleshooting
