Pair Connection Slave Mode - Moxa Technologies NPort 5110 Series User Manual

NPort 5110 Series User's Manual

Pair Connection Slave Mode

TCP alive check time
Setting
0 to 99 min
0 min: TCP connection is not closed due to an idle TCP connection.
1 to 99 min: NPort 5110 automatically closes the TCP connection if there is no TCP activity for
the given time.
Local TCP port
Setting
1 to 65535
The "Local TCP port" is the TCP port that NPort 5110 uses to listen to connections, and that other
devices must use to contact NPort 5110. To avoid conflicts with well known TCP ports, the
default is set to 4001.
Web Console Configuration
Factory Default
7 min
Factory Default
4001
5-20
Necessity
Optional
Necessity
Required