Installation - Agilent Technologies 1100 Series Reference Manual

Switch the system power OFF before beginning these procedures.
WA RN ING
Use only the tools listed in this manual to perform the steps described in the
instructions.
Never perform any operation on the instrument in an environment where potentially
damaging liquids or gases are present.
Do not loosen or tighten any screws, or touch parts other than those specifically
NO TE
designated in the instructions. Doing so may cause misalignment and could void the
instrument warranty.
Never force any component to fit if it will not do so easily.
Agilent 1100 Series Sample Capacity Extension
Reference Manual
2

Installation

Site Preparation 8
Contents of the G2257A Shipping Kit
Installation 11
Adjusting the Lateral Position of the Well-plate Handler
Preliminary Adjustment of the Well-plate Handler Position
Well-plate Handler Teaching
Fine Adjustment of the Well-plate Handler Position
De-Installation of the Automation Interface
Agilent Technologies
9
39
45
48
36
37
7