Insert Plate
A plate must be installed in the transport position of the Automation Interface.
NO TE
Eject Plate
A plate must be installed in the well-plate autosampler.
NO TE
Open Door
Close Door
Test Barcode Reader
Barcode Adjustment On Switches the fixed barcode reader to continuous mode,
Barcode Adjustment Off Switches off continuous mode on the fixed barcode
1100 Series Sample Capacity Extension
Troubleshooting and Error Handling
Opens the door and transfers the plate from the
Automation Interface into the sampler.
Opens the door and transfers the plate from the
sampler into the Automation Interface.
Opens the door.
Closes the door.
Reads the barcode on the plate on the Automation
Interface transport and displays the result in the field.
to allow you to adjust its position.
reader.
5
81