1
Overview
Electrical
G2255A Well-plate Handler
Power Input
Line Voltage
Line Frequency
Fuses
Grounding
Computer Interface
Microprocessor Board
G2254A Automation Interface
Line Voltage
Interfaces
Barcodes
Supported barcode types
Line thickness
Maximum width
Protecting foil
Positioning
6
100-120/200-240V AC, 50/60 Hz (autosensing), 45 watts maximum
100-120/200-240V AC, autosensing
50/60 Hz
For 120V operation:
One 1.5-A, 0.25 in. x 1.25 in.
(0.64 cm. x 3.2 cm.)
For 240V operation:
Two 1.0-A, 0.2 in. x 0.08 in. (5.2-mm x 20-mm).
Through the power cord
RS-232 serial (double shielding required)
80C188 microprocessor-based; 1 reversible DC motor; RS-232
communications link; 2 stepper motors; 4 sensors; Auxiliary 15 pin D
Connector: 1 stepper motor, 2 - 12V outputs, 3 sensors
CAN DC in, 24V
CAN to any Agilent 1100 module
Code 39, Code 128, Codabar, 2 of 5 Interleaved
Between 0.19 and 1 mm
60 mm. A 60 mm barcode with 1 mm lines must be placed on the
landscape side of the plate.
Allowed
For end-mounted barcodes, the top edge of the bars must be 9 mm or
more above the bottom edge of the plate.
1100 Series Sample Capacity Extension