2
Installation
Figure 11
13 Assemble the alignment plate assembly. Use the two M4 screws from the
Figure 12
14 Use the six inch screws from the G2255A Well-plate Handler package,
16
Fastening the lock screws
G2254A Automation Interface package to screw the sheet metal part with
two big holes together with the plastic part (see
Assembling the alignment plate assembly
together with the spacers and washers, to screw the sheet metal parts and
the base plate from the Well-plate Handler together (see
screws centrally in the adjustment slots.
Figure
12).
Figure
1100 Series Sample Capacity Extension
M4 screw
Alignment plate
13). Fix the