Agilent Technologies 1100 Series Reference Manual page 36

2 Installation
Figure 26
The barcode reader has two pairs of mounting screws: one pair towards the
front of the reader, and one pair towards the rear. The mounting plate has two
mounting positions: one towards the front, and one towards the rear.
Installing the Barcode Reader in Portrait Position
1 Remove the front pair of mounting screws from the barcode reader.
Leave the rear mounting screws in place to prevent dust entering the barcode reader.
NO TE
2 Mount the barcode reader on the front position of the mounting plate, as in
28
Rack Well-plate
Extension Handler
Barcodes on the sides of the plates
Figure 27.
Barcode reader in landscape position
Automation
Interface
1100 Series Sample Capacity Extension
Plate location A1
Barcode