Agilent Technologies 1100 Series Reference Manual page 49

Rotary Teaching Instructions
1 Click Set Default Values.
2 Select position R1.
3 Click Move Down until the arm sits just above the rack.
4 Click Plus 10 and/or Plus to move the arm clockwise, or Minus 10 and/or
Figure 34
5 Select a new rack position and repeat instructions 3 and 4.
All positions must be taught, including those of the optional rack extension, if fitted.
NO TE
6 Select position R6 (Automation Interface).
7 Click Move Down until the arm sits just above the transport position.
8 Repeat instructions 3 and 4.
9 Click Save to save the coordinates.
1100 Series Sample Capacity Extension
Minus to move the arm counter-clockwise until the gripper is centralized in
the rack, as in Figure
Gripper arm centralized in the rack
34.
Installation 2
41