Agilent Technologies 1100 Series Reference Manual page 29

Figure 18
11 Slide the cover/fuse block assembly back into the power entry port housing.
Seating the Well-plate Handler on its Locating Plate
The Well-plate Handler weighs approximately 32 pounds (14.53 kg) and should be
WA RN ING
lifted with care. Take the proper precautions to avoid injury.
Four white-tipped locating pins on the Well-plate Handler locating plate are
designed to fit into holes on the underside of the Well-plate Handler.
• If you have just one Agilent 1100 module below the sampler, you can place
• If you have two 140-mm-high modules below the sampler, you need to place
1100 Series Sample Capacity Extension
Fuse-block assembly
Snap the cover/fuse block assembly securely into place.
the Well-plate Handler directly on the pins on the locating plate.
four 30-mm spacers on the locating plate before placing the Well-plate
Handler on the spacer pins (see
Fuse block
Cover
Jumper bar
Figure 19).
Installation 2
Fuses
21