Table of Contents
Advertisement
Configuring TCP/IP Settings
________________________________________________________________________________________________________
118
Exit and restart in Windows mode.
1.
Right-click on the My Network Places icon located on the desktop and select
2.
Properties. The Network and Dial-Up Connections Window opens.
Right-click Local Area Connections and select Properties. The Local Area
3.
Connection Properties Window opens.
Select the Internet Protocol (TCP/IP) by clicking on it once. Once it is highlighted,
4.
select the Properties button. The Internet Protocol (TCP/IP) Properties Window
opens.
Select Use the Following IP Address option. Enter the IP Address and Subnet
5.
mask appropriate for the network. It is recommended to contact the Network
Administrator for appropriate IP settings.
Example:
Common IP addresses are 10.0.0.25
Common Subnet masks are 255.255.255.0
Note
In order to connect to the DVR through a remote LAN connection, a static IP
address must be assigned. If the network assigns the IP address
automatically (DHCP), contact the Network Administrator for help assigning
a static IP address.
6.
If the network requires specifying the DNS information, enter it now by selecting
the appropriate DNS options.
7.
When finished configuring the TCP/IP settings, close the Internet Protocol (TCP/IP)
Properties window by clicking the OK button.
8.
Close the Local Area Connection Properties Window by clicking the OK button.
9.
It may be required to restart Windows for the changes to take effect. Start >
Shutdown > Restart.
Advertisement
Table of Contents
