Configuring Tcp/Ip Settings; Connecting The Dvr To A Lan - Honeywell FUSION III DVR User Manual

FUSION III DVR Digital Recording and Transmission System

9.2.1 CONFIGURING TCP/IP SETTINGS

1. Exit and restart in Windows mode.
2. Right-click on the My Network Places icon located on the desktop and select
Properties. The Network and Dial-Up Connections window opens.
3. Right-click Local Area Connections and select Properties.
The Local Area Connection Properties window opens.
4. Select the Internet Protocol (TCP/IP) by clicking on it once. Once it is highlighted,
select the Properties button. The Internet Protocol (TCP/IP) Properties window
opens.
5. Select Use the Following IP Address option. Enter the IP Address and Subnet
mask appropriate for your network. It is recommended to contact your Network
Administrator for appropriate IP settings.
Example:
NOTE: In order to connect to the DVR unit through a remote LAN connection, a static
6. If the network requires specifying your DNS information, enter it now by selecting
the appropriate DNS options.
7. When finished configuring the TCP/IP settings close the Internet Protocol
(TCP/IP) Properties window by clicking the OK button.1
8. Close the Local Area Connection Properties window by clicking the OK button.
9. It may be required to restart Windows for the changes to take effect.
Restart windows by selecting START on the desktop and selecting Restart.

9.2.2 CONNECTING THE DVR TO A LAN

Using a standard RJ-45 cable, plug one end into a Hub (or Network Jack ultimately
connected to a hub) and the other end into the DVR unit.
9–2
Common IP addresses are 10.0.0.25
Common Subnet masks are 255.255.255.0
IP address must be assigned. If the network assigns the IP address
automatically (DHCP), contact the Network Administrator for help assigning a
static IP address.