Configuring Pan/Tilt/Zoom Settings; Configuring Card Overlay Settings - Honeywell HRHM1041 User Manual

Configuring Pan/Tilt/Zoom Settings

See

Configuring Card Overlay Settings

The card overlay settings allow the DVR to communicate with automated teller machines (ATMs)
and point of sale (POS) machines in a retail environment.
Configuring COM Settings
To configure the COM settings
1.
2.
3.
Configuring PTZ Connection Settings
Go to Main Menu > Setting > System > Card Overlay > Com.
On the Com tab, configure the following settings:
• Protocol Select None or POS.
• Overlay Channel Select a camera.
• Overlay Mode The Preview and Encode overlay modes are enabled by default.
Clear the check boxes if you want to disable them.
• Overlay Position Select Top Left, Bottom Left, Top Right, or Bottom Right.
Click Apply, and then click Save to save the settings.
Configuring System Settings | 115
on page 38.
800-19403 - A - 12/2014