Teletek electronics ECLIPSE 8 Installation Manual page 39

Text Menu
2. End
3. Week days
4. Options
2. Calendar
01. January
02. February
.......
10. October
11. November
12. December
8. Communication
1. Digital Communication
1. Options
2. Attempts
3. Test Messages
1. Time
2. Period
4. Fault Delay
5. Phones
XX. Phone
1. Phone Number
2. Protocol
3. Messages Type
4. Areas
6. UDL
2. PC ID
5. Options
6. Rings
2. Voice Dialer (VD)
1. VD Options
2. VD Message Rep.
4. VD Language
5. VD Phones
XX. Phone
1. Phone Number
3. Message Type
4. Areas
9. Devices
01. Device [MAIN]
1. ID
2. Areas
4. Resources
XX. Device [LCD/LED/PRX]
1. ID
2. Areas
3. Options
4. Resources
5. Comm Quality
6. LED Relocation*
7. ARM Mode A**
8. ARM Mode B**
XX. Device [ZEXP]***
XX. Device [PEXP]***
XX. Device [WEXP]***
6. WL Device**** [DD]
7. WL Remote**** [RR]
* The menu/address is available only for LED keyboards.
** The menus/addresses are available only for Proxy Readers.
*** The available menus/addresses for ZEXP, PEXP and WEXP expanders are 1, 2, 4 and 5. No options are available for settings.
**** The menus/addresses are available only for Wireless expander module – WEXP. The address 8XX6 is accessible only from the main screen of
the Engineering Programming Menus.
Address Menu Eclipse 8
5XX1
5XX2
5XX3
-
5411-5414
5421-5424
.......
5501-5504
5511-5514
5521-5524
60XX Menus for settings of the built-in digital communicator of the system (PSTN).
1.Enable Dialer/2.TLM Enable/3.TLM Alarm/4.Pulse-Tone Dial/5.Tone-Blind Dial/
6000
6.Alternative-All/7-8.Report Channels: PSTN MAIN-GPRS/LAN MAIN
6001
-
6003 Enter the hour for transmitting of the test message 00:00-23:59. Default: 00:05
6002 Enter the period between two test messages 000-255 hours. Default: 024
6004 Enter time delay is case of telephone line fault 000-255 min. Default: 000
-
60XY
60X0
60X1
1.Alarm&Restore/2.Tamper&Restore/3.Panic&Ambush Code/4.Fire/5.Arm, Disarm,
60X2
Bypass/6.Medical Alarm/7.Trouble&Trouble Restore/8.Special Messages
60X3
- Menus for remote up/download settings via built-in digital communicator.
6901
6904
6905
61XX
6100
6101 Enter the number of times for voice message repetition 1-9. Default: 3
6103 [00]-EN;[01]-PT;[02]-IT;[03]-RO;[04]-GR;[05]-Farsi;[06]-FR;[07]-TR;[08]-RS;[09]-ES
-
61XY
61X0
1.Alarm&Restore/2.Tamper&Restore/3.Panic&Ambush Code/4.Fire/5.Arm, Disarm,
61X2
Bypass/6.Medical Alarm/7.Trouble&Trouble Restore/8.Special Messages
61X1
- Menus for Main PCB options. The PCD is always the first device in the system.
8010
8011
8013
8XXY XX:02-03
8XX0
8XX1
8XX2
8XX3
8XX4
8XX5*
8XX7**
[d] - Disarm, press button "1"; [f] - Full Arm, press button "2"; [s] - Stay Arm, press
8XX8**
button "3"; [S] - Sleep Arm, press button "4"; [*] - No action, press button "0".
8XXY***
8XX5**** [DD]
8XX6**** [RR]
Eclipse 8/16/32/99 Series - Installation Manual
Eclipse 16
- -
Enter a number of communication attempts 1-9. Default: 4
Menus for setting of options for test messages.
Menus for setting of phone numbers options.
X:1-2; Y - Option
Enter a telephone number for communication with central station.
Select the communication protocol CID/SIA. Default: CID
- 1-3
Enter a unique PC identification number for up/download.
- 2.Answering Machine/3.Modem Enabled
Enter the number of incoming rings 00-99. Default: 04
Menus for settings of the voice dialer communicator.
1.VD Report Enable/2.VD Manage Enable/4.Skip Site Name
Menus for setting of Voice Dialer phone numbers options.
X:1-8; Y - Option
Enter a telephone number for communication via Voice Dialer.
- 1-3
Review the identification number of the Main PCB.
- 1-3
- Review the hardware resources of the Main PCB.
XX:02-05
Review the identification number of the LCD Keyboard.
- 1-3
1.Chime/2.Hiding zone information/3.Confidential Mode/
-
4.Exit Confidential Mode/5.Main Screen
- Review the hardware resources of the device.
Review the strength of the communication signal between the
-
- -
Set the arm type for every one of the areas (Modes A and B):
- XX:02-05
- -
- XX:02-05
Menu for wireless devices enrolment. DD - device number.
-
Menu for remote key fobs enrolment. RR - key fob number.
39
Eclipse 32
Enter end time for the timeslot.
Select the active days for timeslot.
1.Holidays/2.Invert
Calendar Settings
Submenus for individual setting for every
day of the year.
X:1-4; Y - Option
1-8
1-8
1-8
XX:02-32
1-8
device and the control panel.
-
XX:02-32
Eclipse 99
1-16
1-16
1-16
XX:02-99
1-16
st
Set the 1 zone
XX:02-99