The rear of the Aspen 8810 chassis provides:
The chassis serial number
The Ethernet MAC address of the switch
Symbols of safety certification
Access to the PSU/fan controllers
Uncrating and Unpacking the Aspen 8810 Chassis
Follow these steps to ensure proper uncrating and unpacking for the Aspen 8810 chassis:
1 Ensure that the Tilt Watch and Shock Watch indicators display a white state condition as shown in
Figure
51.
Figure 51: Tilt watch and shock watch indicators
Tilt watch
in white state
CAUTION
Do not proceed with uncrating and unpacking the chassis if either the Tilt Indicator or the Shock Indicator is
displaying a red state condition. Immediately contact Extreme Networks should a red condition occur.
Extreme Networks Consolidated XOS Hardware Installation Guide
Tilt watch
Tilt watch
in red state
Uncrating and Unpacking the Aspen 8810 Chassis
Shock watch
Shock watch
in white state
Shock watch
in red state
EX_084
109