Unpacking The Blackdiamond 8810 Chassis - Extreme Networks BlackDiamond 8800 Series Hardware Installation Manual

Unpacking the BlackDiamond 8810 Chassis

CAUTION
The BlackDiamond 8810 chassis weighs almost 80 pounds. Proper lifting and moving of the chassis requires two
people.
To unpack the BlackDiamond 8810 chassis:
1 Verify that the Tilt Watch and Shock Watch indicators display a white state as shown in
Figure 38: Tilt Watch and Shock Watch Indicators
Tilt watch
Tilt watch
in white state
Tilt watch
in red state
CAUTION
Do not proceed with unpacking the chassis if either the Tilt Watch indicator or the Shock Watch indicator displays a
red warning state. Immediately contact Extreme Networks if a red condition occurs.
2 Open the flaps and remove the contents from the upper shipping carton (see
BlackDiamond 8800 Series Switches Hardware Installation Guide

Unpacking the BlackDiamond 8810 Chassis

Shock watch
Shock watch
in white state
Shock watch
in red state
Figure 38.
EX_084
Figure 34).
75