Extreme Networks BlackDiamond 8810 Hardware Installation Manual page 67

2 Remove the four detachable plastic clip locks found near the bottom of the shipping carton, as
shown in Figure 25.
Two clip locks are located on each side of the carton.
Figure 25: Location of clip locks
Cardboard box
a Place your thumb and index finger inside the clip lock (see
prongs located there.
b Press the prongs inward, applying equal pressure on each side.
c Pull the prongs toward you until the clip lock is released from the carton.
d Repeat steps 2a through 2c to release each of the remaining three clip locks.
Figure 26: Removing the clip locks
Extreme Networks Consolidated XOS Hardware Installation Guide
Tilt watch
Clip locks
Pallet
Squeeze prongs
to unlock
Clip lock
Installing the Chassis
Shock watch
EX_083
Figure 26) adjacent to the two vertical
Open
lock
EX_087
67