10G6X Module; 10G6X Leds - Extreme Networks BlackDiamond 8810 Hardware Installation Manual

10G6X Module

Figure 43 shows the 10G6X module.
Figure 43: 10G6X module
The 10G6X module has six unpopulated XENPAK-based 10 Gigabit Ethernet ports.
If you have one MSM installed, all ports on the 10G6X module are switched through that MSM. If you
have two MSMs installed, the top three ports on the 10G6X module are switched through the MSM in
slot A, and the bottom three ports are switched through the MSM in slot B during normal operation.
The default configuration of the 10G6X module is as follows.
All ports:
• Are added to the default VLAN as untagged.
• Inherit the properties of the default VLAN (for example, protocol type and VLANid).

10G6X LEDs

The 10G6X module has the following LEDs:
Module status
Port status
For information about the LEDs and their activity on the 10G6X module, see
page 93.
Extreme Networks Consolidated XOS Hardware Installation Guide
Module status LEDs
10 Gbs ports
EX_006
I/O Modules
"I/O Module LEDs" on
91