Extreme Networks BlackDiamond 8810 Hardware Installation Manual page 78

BlackDiamond 10K Series Management Switch Module
Table 13: Packet throughput between I/O modules
# of MSMs
1
2
You install the MSM in one of the designated (lettered) slots in the BlackDiamond 10K system chassis.
Figure 38 shows the front view of the MSM.
Figure 38: Management Switch Fabric Module (MSM)
The MSM consists of a printed circuit board mounted on a metal panel that acts as the insertion vehicle
in a BlackDiamond 10K series switch. The module carrier also includes ejector/injector levers and
captive retaining screws at each end of the module front panel.
The MSM has the following ports:
Console port—Used to connect a terminal and perform local management.
Management port—Used to connect an Ethernet cable directly from your laptop into the
management port to view and locally manage the switch configurations.
Modem port—Used to connect a modem for remote access to the CLI.
Compact flash—Use to insert an external compact flash memory card into this port. (Refer to
"External Compact Flash Memory Card" on page 46
supported compact flash cards.).
Extreme Networks Consolidated XOS Hardware Installation Guide
Throughput
160 Gbps
320 Gbps
Module status LEDs
Module reset button
Management port
Console port
Compact flash
EX_003
for more information on Extreme Networks-
78