External Compact Flash Memory Card; Supported External Compact Flash Memory Cards - Extreme Networks BlackDiamond 8810 Hardware Installation Manual

Overview

External Compact Flash Memory Card

The MSM installed in the switch includes a PCMCIA slot (identified as compact flash in
located next to the console port on the MSM. This slot accepts the 256 MB industrial grade compact
flash memory card, which can be used to download a new version of ExtremeWare XOS and a variety
of other functions, including capturing debug information and core dump files. Please see the
ExtremeWare XOS Concepts Guide for more information about how to use the external compact flash
memory card.
The memory card is a flat, smooth card that easily fits between your thumb and forefinger. The card has
a top and bottom side with a ridge protruding from the edge, as shown in
the top of the card identifies it as a PCMCIA card.
Figure 12: Sample compact flash card
The rest of this section describes the compact flash memory card requirements and how to install and
remove an external compact flash memory card.

Supported External Compact Flash Memory Cards

You can purchase the 256 MB industrial grade compact flash card directly from Extreme Networks, or
you can purchase any of the industrial grade compact flash cards listed in
flash cards have been tested and are approved by Extreme Networks for use as an external compact
flash memory card installed in the MSM.
NOTE
You must use an industrial grade compact flash card in the external compact flash slot of the MSM.
Table 9: Supported industrial grade compact flash cards
Manufacturer
®
SanDisk
®
Toshiba
Toshiba
Toshiba
Extreme Networks Consolidated XOS Hardware Installation Guide
Part Number
SDCFB-256-201-80
THNCF256M
THNCF256MDG
THNCF256MDGI
Figure 12. The labeling on
ASP043
Table 9. The listed compact
Figure 13)
46