Msm Leds - Extreme Networks BlackDiamond 8810 Hardware Installation Manual

Aspen 8810 MSM and I/O Modules

MSM LEDs

Table 18 describes the LED activity on the G8X MSM.
Table 18: G8X MSM LEDs
LED Color
SYS/STA Green blinking
Amber blinking
Amber
Off
MSTR/ Green
DIAG
Amber
Green blinking
Off
ERR Amber
Off
ENV Green
Amber
Link on Green
MSTR
Off
Ethernet
port
Activity Amber
on MSTR
NOTE
The LEDs on the management Ethernet port are not labeled. The LED on the right is the link LED, and the one on
the left is the activity LED.
NOTE
The data port LEDs on the G8X MSM operate the same as the port status LEDs on the G24X I/O module.
Extreme Networks Consolidated XOS Hardware Installation Guide
Indicates
Normal operation is occurring.
The status LED flashes amber while diagnostic tests are running on the
module. If a diagnostic test fails, the status LED becomes solid amber. The
lED resets if the diagnostics are terminated. The LED returns to flashing
amber if another diagnostic test is started.
Diagnostic failure has occurred.
Switch is not receiving power.
Module is operating as primary MSM.
Module is operating as secondary, or backup, MSM.
Power-On Self-Test (POST) is running.
Normal operation for diagnostics.
A critical software error has been logged since power-up.
Normal operation is occurring.
Environment (temperature, fan, power supply) is operating properly.
Environmental failure has occurred.
Link is up.
Link is down.
Packet activity is occurring.
120