Rim Exit Installation Instructions - Assa Abloy Corbin Russwin ED5200N Series Installation Instructions Manual

IN120 & IN220 Series
ED5200N / ED5600N Series
Exit Devices for 9100/9M100
7

Rim Exit Installation Instructions

1 Verify Hand and Bevel of Door
Door should be fitted and hung.
Verify box label for size of exit device,
function and hand.
2 Prep door according to Door Marker (FM429)
For door manufacturer templates visit www.corbinrusswin.com
and reference template #'s T31235 & T31236.
Raceway for
Auxiliary Hard-power
Raceway for
IN220 PoE
wiring*
Through-bolt
Holes
Copyright © 2016, 2019, 2021, ASSA ABLOY Access and Egress Hardware Group, Inc.
All rights reserved. Reproduction in whole or in part without the express written
permission of ASSA ABLOY Access and Egress Hardware Group, Inc. is prohibited.
Outside of Door
*See Section IN220 (PoE) Wiring and Installation
Left Hand
Reverse
LHR
Wood Door Preparation
Door Position Switch (DPS)
Raceway
Backplate Mount
Holes
Fig. 2
11
Inside
Right Hand
Reverse
RHR
Outside
Fig. 1
Inside of Door
Raceway for
Auxiliary Hard-power
Raceway for
IN220 PoE
wiring*
Through-bolt
Holes
Trim Tailpiece
Hole
Through-bolt
Holes