1. All LEDs turn red. Then they repeat on/off twice and become on.
2. RFL200 / IP-RFL200's buzzer sounds twice.
4
If key tag is approached by RFL200 / IP-RFL200 when t
he door is opened.
1. The upper of two LEDs still display green color. It means that open the door.
With the rest of LEDs, they indicate whether authentication or not (refer to 9.2 and 9.3).
5
When a key tag is deleted or registered
1. If master card nears the product, buzzer sounds one time and the upper of 3 LEDs turn
green.
2. If a key tag that wish to register new is read by the product, buzzer sounds one time.
And the rests except the upper of 3 LEDs turn green. From the top to the under, they ar
e off in order. When all LEDs are off, LEDs turn red again. At this time, a key tag is regist
ered.
3. If a key tag is already registered, buzzer sounds twice.
The rests except the upper of 3 LEDs turn red. They repeat on/off twice and become on.
At this time, a key tag is deleted.
4. After finishing to register or delete a key tag, if reading a master card again, the upper
of 3
LEDs turn red with beeping one time. And all LEDs turn red.
Note: On the master mode, if user card isn't read within 7 sec., the unit is automati
cally
on general mode.
6
When a master card is deleted or registered again
When a master card is deleted or registered again
p.14