Service Mode; Control Panel; How To Enter/Exit Service Mode - Planmeca ProX Technical Manual

4 SERVICE MODE

4.1 Control panel

Pre-programmed setting
keys and indicator
lights
Exposure warning
indicator light
kV display
Time display
MODE key

4.2 How to enter/exit service mode

Press and hold down the select key for 4 seconds.
Press and hold down the Mode key for more than 2 seconds, until the four uppermost
preprogrammed setting indicator lights come on.
To exit service mode
Press the Mode key for 2 seconds.
NOTE
The service mode parameters 1 - 13 and 20 are for factory use only. Do NOT adjust these
parameters.
Technical manual
6 6
66 6
0 . 2 5
0.250
4 SERVICE MODE
Preprogrammed setting keys
and indicator lights
Adult/child selection key
and indicator lights
Ready indicator light
Exposure key
mA display
SELECT key
Parameter adjustment keys
Planmeca ProX 19