Dimming Displays; Duration Of Displays Dimming Time-Out - Planmeca ProX Technical Manual

4 SERVICE MODE

4.6 Dimming displays

Enter the service mode according to the instruction given in section 4.2 "How to enter/exit
service mode" on page 19.
Press the parameter adjustment up key until the parameter number 16 appears on the kV
display.
16
The number indicating the brightness of the displays (from 1 to 5, factory default is 5) is
shown on the time display.
5
Press the Select key until the number starts to blink, and the value can now be changed
with the parameter adjustment keys.
Select key
Accept the new setting by pressing the Select key.
To exit the service mode press the Mode key for 2 seconds.

4.7 Duration of displays dimming time-out

Enter the service mode according to the instruction given in section 4.2 "How to enter/exit
service mode" on page 19.
Press the parameter adjustment up key until the parameter number 17 appears on the kV
display.
17
The number indicating the time-out value (0, 1, 2, 3, 4, 5) is shown on the time display.
The time-out values are: 0 = no dimming, 1 = 1 min., 2 = 2 min., 3 = 5 min., 4 = 20 min. and
0
5 = 60 min. Factory default is 1.
Press the Select key until the number starts to blink, and the value can now be changed
with the parameter adjustment keys.
Select key
Accept the new setting by pressing the Select key.
To exit the service mode press the Mode key for 2 seconds.
22 Planmeca ProX
Parameter adjustment up -key
Parameter adjustment keys
Parameter adjustment up -key
Parameter adjustment keys
Technical manual