Replacing Tube Head - Planmeca ProX Technical Manual

10.4 Replacing tube head

1. Disconnect the X-ray unit from the mains or switch off the power supply.
2. Remove the tube head covers as described in section 10.2 "Removing tube head covers"
on page 46.
3. Unscrew the attachment screw of the protective lead using a 2.5 mm Allen key and
remove the lead.
4. Unscrew two collimator attachment screws using a 2.5 mm Allen key and remove the
collimator.
Technical manual
10 PARTS REPLACEMENT & REPAIR
Planmeca ProX 49