Table of Contents
Advertisement
SHB150R LGA1151 Full-size CPU Card
2.3.1
Auto Power On (JP3)
If JP3 is enabled for power input, the system will be automatically power on without
pressing soft power button. If JP3 is disabled for power input, it is necessary to manually
press soft power button to power on the system.
Function
Enable auto power on (Default)
Disable auto power on
2.3.2
Restore BIOS Optimal Defaults (JP2)
Put jumper clip to pin 2-3 for a few seconds then move it back to pin 1-2. Doing this
procedure can restore BIOS optimal defaults.
Function
Normal operation (Default)
Restore BIOS optimal defaults
8
Setting
1-2 close
2-3 close
Setting
1-2 close
2-3 close
Board and Pin Assignments
Advertisement
Table of Contents
Need help?
Do you have a question about the SHB150R Series and is the answer not in the manual?
Questions and answers