AXIOMTEK SHB106 Series User Manual
  1. Manuals
  2. Brands
  3. AXIOMTEK Manuals
  4. Single board computers
  5. SHB106 Series
  6. User manual

AXIOMTEK SHB106 Series User Manual

Intel® socket 1155 core™i7 / core™i5 / core™i3 / processor picmg 1.3 full-size cpu card
Hide thumbs
Table of Contents

Advertisement

Quick Links

SHB106 Series
™
™
®
Intel
Socket 1155 Core
i7 / Core
i5 /
™
Core
i3 / Processor
®
PICMG
1.3 Full-Size CPU Card
User's Manual

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the SHB106 Series and is the answer not in the manual?

Questions and answers

Related Manuals for AXIOMTEK SHB106 Series

Summary of Contents for AXIOMTEK SHB106 Series

  • Page 1 SHB106 Series ™ ™ ® Intel Socket 1155 Core i7 / Core i5 / ™ Core i3 / Processor ® PICMG 1.3 Full-Size CPU Card User’s Manual...
  • Page 2 Axiomtek does not make any commitment to update the information in this manual. Axiomtek reserves the right to change or revise this document and/or product at any time without notice. No part of this document may be reproduced, stored in a retrieval...
  • Page 3 Wear a wrist-grounding strap, available from most electronic Component stores, when handling boards and components. Trademarks Acknowledgments Axiomtek is a trademark of Axiomtek Co., Ltd. ® Windows is a trademark of Microsoft Corporation. AMI are trademarks of American Megatrend Inc.

  • Page 4: Table Of Contents

    Table of Contents CHAPTER 1 INTRODUCTION ................1 Specifications............... 2 Utilities Supported ..............4 CHAPTER 2 JUMPERS AND CONNECTORS ..........5 Board Dimension ..............5 Board Layout ............... 6 Jumper Settings ..............7 2.3.1 COM1 Mode Select Jumpers for RS232/422/485 (JP2, JP3, JP4) ..................
  • Page 5 I/O Port Address Map ............34 Interrupt Controller (IRQ) Map ........... 35 CHAPTER 5 AMI BIOS UTILITY ..............37 Starting ................37 Navigation Keys ..............37 Main Menu ................. 39 Advanced Menu ..............40 Chipset Menu ..............52 Boot Menu ................. 55 Security Menu ..............
  • Page 6 MEMO:...

  • Page 7: Chapter 1 Introduction

    SHB106 LAG1155 Full-Size SBC User’s Manual CHAPTER 1 INTRODUCTION ® The SHB106 PICMG 1.3 full-size Single Board Computer supports LAG1155 socket for Intel® Core™ i3 Desktop Processor, Intel® Core™ i5 Desktop Processor, Core™ i7 Desktop Processor with 32nm technology and Transfer Rate 1066/1333 MHz. The board integrates ®...

  • Page 8: Specifications

    SHB106 LAG1155 Full-Size SBC User’s Manual 1.1 Specifications  CPU Intel® Core™ i3 Desktop Processor  Intel® Core™ i5 Desktop Processor  Intel® Core™ i7 Desktop Processor   System Chipset  Intel® Q67  CPU Socket  LAG1155 Socket ...
  • Page 9 SHB106 LAG1155 Full-Size SBC User’s Manual  Onboard Graphic  Intel® Arrandale integrated Graphic processing unit processors which goes with Q67 chipset with,VGA,DisplayPort (co-lay with VGA)  Memory Size --Intel® DVMT 5.0 supported; preallocated memory for frame buffer option as OS option: Windows XP: * For Total System Memory <...

  • Page 10: Utilities Supported

    SHB106 LAG1155 Full-Size SBC User’s Manual  Audio  10-pin 2.0 pin-header (Intel® HD Audio Digital Header)  Hardware Monitoring  Monitoring temperatures, voltages, and cooling fan status  Watchdog Timer  Reset Supported (1-255 level)  Dimensions  338mm x 126mm ...

  • Page 11: Chapter 2 Jumpers And Connectors

    SHB106 LAG1155 Full-Size SBC User’s Manual CHAPTER 2 JUMPERS AND CONNECTORS 2.1 Board Dimension Jumpers And Connectors...

  • Page 12: Board Layout

    SHB106 LAG1155 Full-Size SBC User’s Manual 2.2 Board Layout CN10 Jumpers And Connectors...

  • Page 13: Jumper Settings

    SHB106 LAG1155 Full-Size SBC User’s Manual 2.3 Jumper Settings Proper jumper settings configure the SHB106 to meet your application purpose. We are herewith listing a summary table of all jumpers and default settings for onboard devices, respectively. Jumper Description Jumper Setting COM1 Mode Selection : RS-232 Short 3-5 , 4-6 COM1 Mode Selection : RS-232...

  • Page 14: Audio Ampliier Jumper (Jp1)

    SHB106 LAG1155 Full-Size SBC User’s Manual 2.3.2 Audio Ampliier Jumper (JP1) Function Jumper Setting Disable (Default) Enable 2.3.3 Clear ME Jumper (JP6) You may need to use this jumper to clear the ME if incorrect ME settings. Function Jumper Setting Normal (Default) Clear ME...

  • Page 15: Connectors

    USB Port 8/9 USB Port 12/13 USB Port 10/11 LAN2 External LED LAN1 External LED VGA Port CN10 CN11 Display Port (BOM Option) CN12 Axiomtek Front Panel Keyboard CN13 CN14 Mouse CN17 USB Port 5 CN18 USB Port 4 COM1 Connector...

  • Page 16: Smbus Connector (Cn1)

    SHB106 LAG1155 Full-Size SBC User’s Manual Connector Label LAN2 RJ45 (WG82574L) PRINT1 Print Connecter SATA 0 6.0Gb(SATA3) SATA1 SATA 1 6.0Gb(SATA3) SATA2 SATA3 SATA Port 2 SATA4 SATA Port 5 SATA Port 3 SATA5 SATA6 SATA Port 4 2.4.1 SMBUS Connector (CN1) Connector SMBUS CN1 is for SMBUS interface support.

  • Page 17: Floppy Disk Port Connector (Cn2)

    SHB106 LAG1155 Full-Size SBC User’s Manual 2.4.2 Floppy Disk Port Connector (CN2) The board provides a 34-pin header type connector, CN2, supporting up to two floppy drives. The floppy drives may be any one of the following types: 5.25" 360KB/1.2MB and 3.5" 720KB/1.44MB/2.88MB. Signal Signal Signal...

  • Page 18: Internal Usb Connectors (Cn3,Cn4,Cn5,Cn6)

    SHB106 LAG1155 Full-Size SBC User’s Manual 2.4.3 Internal USB Connectors (CN3,CN4,CN5,CN6) The 10-pin standard Universal Serial Bus (USB) connectors, CN3/4/5/6, on this board are for installing versatile USB interface peripherals. Signal Signal USB_PWR USB_PWR USB6- USB7- USB6+ USB7+ 10 GND Signal Signal USB_PWR...

  • Page 19: Lan2 Led Connectors (Cn7)

    SHB106 LAG1155 Full-Size SBC User’s Manual Signal Signal USB_PWR USB_PWR USB10- USB11- USB10+ USB11+ 10 GND 2.4.4 LAN2 LED Connectors (CN7) Signal + 3.3V LINK_ACT LED(-) 100, Low Active +3.3V 1000, Low Active 2.4.5 LAN1 LED Connectors (CN8) Signal + 3.3V LINK_ACT LED(-) 100, Low Active +3.3V...

  • Page 20: Db15 Crt Connector (Cn10) Co-Layout With Cn11

    SHB106 LAG1155 Full-Size SBC User’s Manual 2.4.6 DB15 CRT Connector (CN10) Co-layout with CN11 CN10 is a DB15 connector commonly used for the CRT Monitor. Signal Signal Signal Blue Green DETECT DDC DATA DDC CLK Horizontal Sync Vertical Sync 2.4.7 Display Port Connector (CN11) Co-layout with CN10 CN11 is a Standard Display Port Connector co-layout with CN10.

  • Page 21: Front Panel Connector (Cn12)

    SHB106 LAG1155 Full-Size SBC User’s Manual Signal DPB_LANE3# Detect Pin DPB_AUX DPB_AUX# DPB_HPDE +3.3V 2.4.8 Front Panel Connector (CN12)  Power LED This 3-pin connector denoted as Pin 1 and Pin 5 connects the system power LED indicator to such a switch on the case. Pin 1 is assigned as +, and Pin 5 as -.

  • Page 22: Ps/2 Keyboard, Mouse Connectors (Cn13, Cn14)

    SHB106 LAG1155 Full-Size SBC User’s Manual  System Reset Switch Pin 11 and 12 can be connected to the case-mounted reset switch that reboots your computer instead of turning OFF the power switch. It is a better way to reboot your system for a longer life of the system‟s power supply.

  • Page 23: Rs232/422/485 Pin Assignment (Com1)

    SHB106 LAG1155 Full-Size SBC User’s Manual 2.4.11 RS232/422/485 Pin Assignment (COM1) The serial interface for the board consists of COM1 support for RS- 232 and COM1 for RS-232/RS-422/RS-485. Signal Name RS-232 RS-422 RS-485 DATA- Data Carrier Detect (DCD) No connector No connector Data Set Ready (DSR) DATA+...

  • Page 24: Com Port Rs-232 Pin Assignment (Com2)

    SHB106 LAG1155 Full-Size SBC User’s Manual 2.4.12 COM Port RS-232 Pin Assignment (COM2) COM2 Serial Port 10-pin (Box-header) Connector Pin Assignment list Signal Signal Data Carrier Detect (DCD) Data Set Ready (DSR) Receive Data (RXD) Request to Send (RTS) Transmit Data (TXD) Clear to Send (CTS) Data Terminal Ready (DTR) Ring Indicator (RI)

  • Page 25: Atx 8 Pin 12V In Connector (Atx1)

    SHB106 LAG1155 Full-Size SBC User’s Manual 2.4.14 ATX 8 Pin 12V IN Connector (ATX1) You can connect it to the ATX12V power supply for CPU Core Voltage. Signal +12V +12V +12V +12V 2.4.15 A CPU fan is always needed for cooling CPU heat (FAN1) The CPU fan connector FAN1 provides power to the CPU fan.

  • Page 26: Ethernet Rj-45 Connectors (Lan1, Lan2)

    SHB106 LAG1155 Full-Size SBC User’s Manual 2.4.17 Ethernet RJ-45 Connectors (LAN1, LAN2) The RJ-45 connectors LAN1 and LAN2 are for Ethernet. To connect the board to 100-Base-T or 1000-Base-T hub, just plug one end of the cable into LAN1 and connect the other end (phone jack) to a 100- Base-T hub or 1000-Base-T hub.

  • Page 27: Parallel Port Connector (Print1) Print Port Connector

    SHB106 LAG1155 Full-Size SBC User’s Manual 2.4.18 Parallel Port Connector (PRINT1) Print Port Connector This board has a multi-mode parallel port to support:  Standard Mode: IBM PC/XT, PC/AT and PS/2 are compatible with bi-directional parallel port.  Enhanced Mode: Enhance parallel port (EPP) is compatible with EPP 1.7 and EPP 1.9 (IEEE 1284 compliant).

  • Page 28: Sata6)

    SHB106 LAG1155 Full-Size SBC User’s Manual 2.4.19 SATA Connectors (SATA1 ,SATA2 ,SATA3 ,SATA4 ,SATA5 , SATA6) These SATA connectors are for high-speed SATA interface ports and they can be connected to hard disk devices. Signal SATA_TX+ SATA_TX- SATA_RX- SATA_RX+ Jumpers And Connectors...

  • Page 29: Chapter 3 Hardware Installation

    SHB106 LAG1156 Full-Size SBC User’s Manual CHAPTER 3 HARDWARE INSTALLATION ® Before installing the processor, please access Intel website for more detail information Processor Integration Video (LGA1155): http://www.intel.com/support/tw/processors/sb/CS-030860.htm . 3.1 Installing the Processor The LGA1155 processor socket comes with a cover to protect the processor.
  • Page 30 SHB106 LAG1155 Full-Size SBC User’s Manual Step2 Removing the socket protective cover:  Place thumb against the front edge of the protective cover and rest index finger on the rear grip to maintain control of the cover.  Lift the front edge of the protective cover to disengage from the socket.
  • Page 31 SHB106 LAG1156 Full-Size SBC User’s Manual Step3 Processor installation:  Lift processor package from shipping media by grasping the substrate edges. Scan the processor package gold pads for any presence of foreign material. If necessary, the gold pads can be wiped clean with a soft lint-free cloth and isopropyl alcohol.
  • Page 32 SHB106 LAG1155 Full-Size SBC User’s Manual  Grasp the processor with thumb and index finger along the top and bottom edges. (Do not touch the Orientation Notches.) The socket will have cutouts for your fingers to fit into (see image below).
  • Page 33 SHB106 LAG1156 Full-Size SBC User’s Manual  Verify that package is within the socket body and properly connected to orientation keys.  Close the socket (see image below): A. Gently lower the load plate. B. Make sure load plate's front edge slides under the shoulder screw cap as the lever is lowered.
  • Page 34 SHB106 LAG1155 Full-Size SBC User’s Manual  Close the socket (see image below): A Gently lower the load plate. B Make sure load plate's front edge slides under the shoulder screw cap as the lever is lowered. C atch the lever under the top plate's corner tab being cautious not to damage the motherboard with the tip of the lever.
  • Page 35 SHB106 LAG1156 Full-Size SBC User’s Manual Step4 Fan heatsink handling: 1. Orientate the CPU cooling fan to fixing holes on the board. 2. Screw the CPU cooling fan onto the board. 3. Make sure the CPU fan is plugged to the CPU fan connector. Hardware Installation...
  • Page 36 SHB106 LAG1155 Full-Size SBC User’s Manual Step5 Removing the processor:  Open the socket: A. Disengage the load lever. B. Open the load plate.  Remove the Processor package, holding along the top and bottom edges, or by using a vacuum pen. ...
  • Page 37 SHB106 LAG1156 Full-Size SBC User’s Manual i. Engage protective cover retention features to outside of LGA1155 Socket, AND align 2 cover corners to socket corners (This step is critical to avoid Bent Contact Damage!) ii. Lower protective cover to attach to the LGA1155 Socket on Shoulder screw side ...

  • Page 38: Installing The Memory

    SHB106 LAG1155 Full-Size SBC User’s Manual 3.2 Installing the Memory The board supports four 240-pin DDR3 DIMM memory sockets with maximum memory capacity up to 8GB. Please follow steps below to install the memory modules:  Push down latches on each side of the DIMM socket. ...

  • Page 39: Chapter 4 Hardware Description

    Make sure all correct settings are arranged for your installed microprocessor to prevent the CPU from damages. 4.2 BIOS The SHB106 Series uses AMI Plug and Play BIOS with a single 32Mbit SPI Flash. 4.3 System Memory The SHB106 Series supports Two 240-pin DDR3 DIMM sockets for a maximum memory of 8GB DDR3 SDRAMs.

  • Page 40: I/O Port Address Map

    SHB106 LAG1155 Full-Size SBC User’s Manual 4.4 I/O Port Address Map ™ ™ ™ ® The Intel Core i7 / Core i5 / Core i3 processors can communicate via I/O ports. There are total 1KB port addresses available for assignment to other devices via I/O expansion cards Address Devices 000-01F...

  • Page 41: Interrupt Controller (Irq) Map

    SHB106 LAG1156 Full-Size SBC User’s Manual 4.5 Interrupt Controller (IRQ) Map The SHB106 Series is a 100% PC compatible control board. It consists of 16 interrupt request lines, and four out of them can be programmable. The mapping list of the 16 interrupt request lines is shown as the following table.
  • Page 42 SHB106 LAG1155 Full-Size SBC User’s Manual MEMO: Hardware Description...

  • Page 43: Chapter 5 Ami Bios Utility

    SHB106 LAG1156 Full-Size SBC User’s Manual CHAPTER 5 AMI BIOS UTILITY This chapter provides users with detailed description how to set up basic system configuration through the AMIBIOS8 BIOS setup utility. 5.1 Starting To enter the setup screens, follow the steps below: ...
  • Page 44 SHB106 LAG1155 Full-Size SBC User’s Manual  The Left <Arrow> keys allow you to select a setup Left/Right screen.  The Up and Down <Arrow> keys allow you to select a Up/Down setup screen or sub-screen. + The Plus and Minus <Arrow> keys allow you to Plus/Minus change the field value of a particular setup item.

  • Page 45: Main Menu

    SHB106 LAG1156 Full-Size SBC User’s Manual 5.3 Main Menu When you first enter the Setup Utility, you will enter the Main setup screen. You can always return to the Main setup screen by selecting the Main tab. There are two Main Setup options. They are described in this section.

  • Page 46: Advanced Menu

    SHB106 LAG1155 Full-Size SBC User’s Manual 5.4 Advanced Menu  Launch PXE OpROM Use this item to enable or disable the Boot ROM function of the onboard LAN chip when the system boots up.  Launch Storage OpROM This item can set enable or disable the storage device option ROM with CF device.
  • Page 47 SHB106 LAG1156 Full-Size SBC User’s Manual AMI BIOS Utility...
  • Page 48 SHB106 LAG1155 Full-Size SBC User’s Manual  ACPI Settings You can use this screen to select options for the ACPI Configuration, and change the value of the selected option. A description of the selected item appears on the right side of the screen. ...
  • Page 49 SHB106 LAG1156 Full-Size SBC User’s Manual  Trusted Computing You can use this screen to select options for the Trusted Computing, and change the value of the selected option. A description of the selected item appears on the right side of the screen. ...
  • Page 50 SHB106 LAG1155 Full-Size SBC User’s Manual  CPU Configuration This screen shows the CPU Configuration, and you can change the value of the selected option.  Hyper-threading This item can set enable or disable for support Hyper-threading Technology.  Active Processor Cores This feature controls the number of cores to enable in each processor package.
  • Page 51 SHB106 LAG1156 Full-Size SBC User’s Manual  Intel Virtualization Technology Allows a hardware platform to run multiple operating systems separately and simultaneously, enabling one system to virtually function as several systems.  SATA Configuration You can use this screen to select options for the SATA Configuration, and change the value of the selected option.
  • Page 52 SHB106 LAG1155 Full-Size SBC User’s Manual  Serial-ATA Controller 1 Use this item to control the onboard SATA controller. Here are the options for your selection, Enhanced and Disabled.  Intel IGD SWSCI OpRegion The Intel IGD SWSCI OpRegion allows users to change the integrated graphic device settings.
  • Page 53 SHB106 LAG1156 Full-Size SBC User’s Manual  USB Configuration You can use this screen to select options for the USB Configuration, and change the value of the selected option. A description of the selected item appears on the right side of the screen. ...
  • Page 54 SHB106 LAG1155 Full-Size SBC User’s Manual  Super IO Configuration You can use this screen to select options for the Super IO Configuration, and change the value of the selected option. A description of the selected item appears on the right side of the screen.
  • Page 55 SHB106 LAG1156 Full-Size SBC User’s Manual  Parallel Port Configuration This item allows you to determine the Parallel Port Mode and I/O address for onboard parallel port.  H/W Monitor This screen shows the Hardware Health Configuration, and a description of the selected item appears on the right side of the screen ...
  • Page 56 SHB106 LAG1155 Full-Size SBC User’s Manual  AMT Configuration You can use this screen to select options for the Intel AMT Configuration, and change the value of the selected option. A description of the selected item appears on the right side of the screen.
  • Page 57 SHB106 LAG1156 Full-Size SBC User’s Manual  Serial Port Console Redirection AMI BIOS Utility...

  • Page 58: Chipset Menu

    SHB106 LAG1155 Full-Size SBC User’s Manual 5.5 Chipset Menu The Chipset menu allows users to change the advanced chipset settings. You can select any of the items in the left frame of the screen to go to the sub menus: ...
  • Page 59 SHB106 LAG1156 Full-Size SBC User’s Manual  South Bridge  USB Configuration You can use this item to set the USB Configuration. AMI BIOS Utility...
  • Page 60 SHB106 LAG1155 Full-Size SBC User’s Manual  Me Subsystem It is strongly recommended that you do not modify these options unless you are an advanced user. AMI BIOS Utility...

  • Page 61: Boot Menu

    SHB106 LAG1156 Full-Size SBC User’s Manual 5.6 Boot Menu The Boot menu allows users to change boot options of the system. You can select any of the items in the left frame of the screen to go to the sub menus: ...
  • Page 62 SHB106 LAG1155 Full-Size SBC User’s Manual  Quite Boot Use this item to enable or disable the Quite Boot state. The default setting is disabling.  Bootup NumLock State Use this item to select the power-on state for the NumLock. The default setting is on.

  • Page 63: Security Menu

    SHB106 LAG1156 Full-Size SBC User’s Manual 5.7 Security Menu The Security menu allows users to change the security settings for the system.  Administrator Password This item indicates whether an administrator password has been set. If the password has been installed, Installed displays. If not, Not Installed displays.

  • Page 64: Save & Exit Menu

    SHB106 LAG1155 Full-Size SBC User’s Manual 5.8 Save & Exit Menu The Save & Exit menu allows users to load your system configuration with optimal or failsafe default values.  Save Changes and Exit When you have completed the system configuration changes, select this option to leave Setup and return to Main Menu.
  • Page 65 SHB106 LAG1156 Full-Size SBC User’s Manual  Save Changes and Reset When you have completed the system configuration changes, select this option to leave Setup and reboot the computer so the new system configuration parameters can take effect. Select Save Changes and Reset from the Save & Exit menu and press <Enter>.
  • Page 66 SHB106 LAG1155 Full-Size SBC User’s Manual MEMO : AMI BIOS Utility...

  • Page 67: Appendix Awatchdog Timer

    SHB106 LAG1156 Full-Size SBC User’s Manual APPENDIX A WATCHDOG TIMER Watchdog Timer Setting After the system stops working for a while, it can be auto-reset by the Watchdog Timer. The integrated Watchdog Timer can be set up in the system reset mode by program. Using the Watchdog Function Start ...
  • Page 68 SHB106 LAG1155 Full-Size SBC User’s Manual :O 2E F6 O 2F M=00, 01, 02 FF(Hex) ,Value=0 to 255  WDT counting re-set timer :O 2E F6 O 2F M ; M=00,01,02,…FF(See below table)  IF No re-set timer : WDT time-out, generate RESET IF to disable WDT : O 2E 30 O 2F 00;...

  • Page 69: Appendix B Pci Irq Routing

    SHB106 LAG1156 Full-Size SBC User’s Manual APPENDIX B PCI IRQ ROUTING ® PICMG PCI IRQ Routing Device Slot PCI Slot 0 BCDA PCI Slot 1 CDAB PCI Slot 2 DABC PCI Slot 3 ABCD PCI IRQ Routing...

  • Page 70: Appendix Cconfiguring Sata For Raid Function

    SHB106 LAG1155 Full-Size SBC User’s Manual APPENDIX C CONFIGURING SATA FOR RAID FUNCTION Configuring SATA Hard Drive(s) for RAID Function ® (Controller: Intel 3450) Please follow up the steps below to configure SATA hard drive(s): Install SATA hard drive(s) in your system. Enter the BIOS Setup to configure SATA controller mode and boot sequence.
  • Page 71 SHB106 LAG1156 Full-Size SBC User’s Manual Configuring SATA controller mode and boot sequence by the BIOS Setup You have to make sure whether the SATA controller is configured correctly by system BIOS Setup and set up BIOS boot sequence for the SATA hard drive(s) (2)-1-1 Turn on your system, and then press the Del button to enter BIOS Setup during running POST (Power-On Self Test).
  • Page 72 SHB106 LAG1155 Full-Size SBC User’s Manual (2)-1-2 A list of options appears, please select RAID. Configuring SATA for RAID Function...
  • Page 73 SHB106 LAG1156 Full-Size SBC User’s Manual (2)-2 Set CDROM for First Boot Device under the Boot Settings menu to boot CD-ROM after system restarts. Configuring SATA for RAID Function...
  • Page 74 SHB106 LAG1155 Full-Size SBC User’s Manual (2)-3 Save and exit the BIOS Setup. (3) Configuring RAID by the RAID BIOS Enter the RAID BIOS setup utility to configure a RAID array. Skip this step and proceed to Section 4 if you do not want to create a RAID.
  • Page 75 SHB106 LAG1156 Full-Size SBC User’s Manual (3)-2 After you press <CTRL+ I>, the Create RAID Volume screen will appear. If you want to create a RAID array, select the Create RAID Volume option in the Main Menu and press ENTER. Configuring SATA for RAID Function...
  • Page 76 SHB106 LAG1155 Full-Size SBC User’s Manual (3)-3-1 After entering the CREATE VOLUME MENU screen, you can type the disk array name with 1~16 letters (letters cannot be special characters) in the item “Name”. (3)-3-2 When finished, press ENTER to select a RAID level. There are three RAID levels, RAID0, RAID1 and RAID5 &...
  • Page 77 SHB106 LAG1156 Full-Size SBC User’s Manual (3)-4 Set the stripe block size. The KB is the standard unit of stripe block size. The stripe block size can be 4KB to 128KB. After the setting, press ENTER for the array capacity. (3)-5 After setting all the items on the menu, select Create Volume and press ENTER to start creating the RAID array.
  • Page 78 SHB106 LAG1155 Full-Size SBC User’s Manual (3)-6 When prompting the confirmation, press “Y“ to create this volume, or “N“ to cancel the creation. After the creation is completed, you can see detailed information about the RAID Array in the DISK/VOLUME INFORMATION section, including RAID mode, disk block size, disk name, and disk capacity, etc.
  • Page 79 SHB106 LAG1156 Full-Size SBC User’s Manual  Delete RAID Volume If you want to delete a RAID volume, select the Delete RAID Volume option in Main Menu. Press ENTER and follow on-screen instructions. Please press [ESC] to exit the RAID BIOS utility. Now, you can proceed to install a SATA driver controller and the operating system.
  • Page 80 SHB106 LAG1155 Full-Size SBC User’s Manual Installing SATA controller driver during the OS installation Now, the SATA driver disk is ready, and BIOS settings configured, you can proceed to install Windows 2000/XP onto your SATA hard drive using the SATA driver. Here is an example for Windows XP installation. (5)-1 Restart your system to boot the Windows 2000/XP Setup disk, and press F6 button as soon as you see the message "Press F6 if you need to install a 3rd party SCSI or RAID...
  • Page 81 SHB106 LAG1156 Full-Size SBC User’s Manual (5)-2 When you see the screen below, insert the floppy disk containing the SATA driver and press “S”. Configuring SATA for RAID Function...
  • Page 82 SHB106 LAG1155 Full-Size SBC User’s Manual (5)-3 If the Setup correctly recognizes the driver of the floppy disk, a controller menu will appear below. Use the ARROW keys to select Intel® ICH8R/ICH9R/ICH10R/DO/PCH SATA RAID Controller and press ENTER. Then it will begin to load the SATA driver from the floppy disk.

  • Page 83: Appendix D Iamt Settings

    SHB106 LAG1156 Full-Size SBC User’s Manual APPENDIX D iAMT SETTINGS ® ® The Intel Active Management Technology (Intel iAMT) has decreased a major barrier to IT efficiency that uses built-in platform capabilities and popular third-party management and security applications to allow IT a better discovering, healing, and protection their networked computing assets.

  • Page 84: Set & Change Password

    SHB106 LAG1155 Full-Size SBC User’s Manual D.2 Set & Change Password You will be asked to set a password when first log in. The default password is „admin‟. Change Password You will be asked to change the password before setting ME iAMT Settings...
  • Page 85 SHB106 LAG1156 Full-Size SBC User’s Manual You must confirm your new password while revising. (as Remark The new password must contain: (example: !!11qqQQ) (default value)Eight characters  One upper case  One lower case  One number  One special symbol, such as ! 、 $ or ; ， ...

  • Page 86: Intel® Iamt Settings

    SHB106 LAG1155 Full-Size SBC User’s Manual D.3 Intel® iAMT Settings ® Select Intel iAMT Configuration and press <ENTER>. ® iAMT set to „DHCP„, the Host 1. Key in the Host Name. If Intel name must be identical to the operating system mechanic. iAMT Settings...
  • Page 87 SHB106 LAG1156 Full-Size SBC User’s Manual 2. Select TCP/IP to get into Network interface, and set it to „ENABLED‟; into DHCP Mode, and set it to „DISABLED‟ (as Remark 2) ; into Domain name, and set the Intel Management Engine domain name, such as „AMT.intel.com‟. (3-1) (3-2) iAMT Settings...
  • Page 88 SHB106 LAG1155 Full-Size SBC User’s Manual DHCP Mode „DISABLED„: if DHCP you can make th Remark 2 Mode is disabled, e following settings:  IP address  Subnet mask iAMT Settings...
  • Page 89 SHB106 LAG1156 Full-Size SBC User’s Manual  Default Gateway address  Preferred DNS address iAMT Settings...
  • Page 90 SHB106 LAG1155 Full-Size SBC User’s Manual  Alternate DNS address  Domain name Exit from MEBx after completing the iAMT settings. iAMT Settings...

  • Page 91: Iamt Web Console

    SHB106 LAG1156 Full-Size SBC User’s Manual D.4 iAMT Web Console From a web browser, please type http://(IP ADDRESS):16992, which connects to iAMT Web. Example: http://10.1.40.214:16992 To log on, you will be required to type in username and password for access to the Web. USER: admin (default value) PASS: (MEBx password) iAMT Settings...
  • Page 92 SHB106 LAG1155 Full-Size SBC User’s Manual 3. Enter the iAMT Web. 4 Click Remote Control, and select commands on the right side. 5. When you have finished using the iAMT Web console, close the Web browser iAMT Settings...

  • Page 93: Appendix E Picmg V1.3 Interface Definition

    SHB106 LAG1156 Full-Size SBC User’s Manual APPENDIX E ® PICMG v1.3 INTERFACE DEFINITION x16 PCIe Connector A x16 PCIe Connector C Side B Side A Side B Side A USB0P USB0N USB1P USB1N WAKE# USB2P PWRBT# PME# USB2N PWRGD PSON# USB3P SHB_RST# PERST#...
  • Page 94 SHB106 LAG1155 Full-Size SBC User’s Manual Mechanical Key 27 GND b_PERp3 27 GND 28 GND b_PERn3 28 GND 29 REFCLK0+ 29 N.C 30 REFCLK0- 30 N.C 31 GND REFCLK1+ 31 N.C 32 N.C 32 RSVD REFCLK1- 33 N.C 33 REFCLK2+ 34 N.C 34 REFCLK2- 35 N.C...
  • Page 95 SHB106 LAG1156 Full-Size SBC User’s Manual Mechanical Key 58 a_PETn3 58 GND 59 GND a_PERp3 59 +5V 60 GND a_PERn3 60 +5V 61 a_PETp4 61 +5V 62 a_PETn4 62 +5V 63 GND a_PERp4 63 GND 64 GND a_PERn4 64 GND 65 a_PETp5 65 GND 66 a_PETn5...
  • Page 96 SHB106 LAG1155 Full-Size SBC User’s Manual X8 PCIe Connector B X8 PCIe Connector D Side B Side A Side B Side A +5Vaux +5Vaux INTB# INTA# INTD# INTC# a_PETp8 a_PETn8 REQ3# GNT3# a_PERp8 REQ2# GNT2# a_PERn8 PCI_RST# GNT1# a_PETp9 REQ1# GNT0# a_PETn9 REQ0#...
  • Page 97 SHB106 LAG1156 Full-Size SBC User’s Manual Chanical Key 29 a_PETp14 29 C/BE2# 30 a_PETn14 30 PCI_PRST# FRAME# 31 GND a_PERp14 31 IRDY# TRDY# 32 GND a_PERn14 32 DEVSEL# 33 a_PETp15 33 LOCK# STOP# 34 a_PETn15 34 PERR# 35 GND a_PERp15 35 GND C/BE1# 36 GND...

Table of Contents