Installing Dimm - NEC Express5800/R320a-E4 User Manual

Installing DIMM

Follow the procedure below to install the DIMM.
1.
Shut down OS.
The sever turns off automatically.
2.
Disconnect the power cords from the outlets.
3.
Remove the CPU/IO module referring to page 8-12.
4.
Remove three screws (two on the front and one on the rear), and remove the top cover of
the CPU/IO module.
5.
Remove the air duct.
6.
Check to be sure in which socket you are mounting the DIMM
System Upgrade 8-19
Air duct