Table of Contents
Advertisement
5. From the list, select DHCP: Enable and hit the space bar to toggle
enabling or disabling the DHCP server. It should change to DHCP:
Disable with additional fields, as follows:
6. For the fields Fixed IP, Subnet Mask, and Default Gateway, select each
choice and enter the numerical address (dotted quad address).
7. Go to Save and Reset and enter Y to confirm the new IP address.
IP Installer
For computers running Windows, an IP address can be assigned with the IP
Installer utility:
1. On the Software CD that came with your CN8600 package, go to the
directory that the IP Installer program resides in, and run IPInstaller.exe.
A dialog box similar to the one below appears:
Appendix
129
Advertisement
Table of Contents
