Table of Contents
Advertisement
CN8600 User Manual
Laptop USB Console
To use the mini-B USB port for laptop USB console (LUC) operations, set the
switch at the rear panel of the CN8600 to LUC.
Note: The LUC function only works for Windows systems.
The laptop application (AP) program for operating the LUC is built into the
CN8600's firmware and does not require a download. To access the switch, do
the following:
1. Use the USB 2.0 cable (A-type to mini USB) included in the package to
connect your laptop to the CN8600's mini USB port, located on the unit's
rear panel (see Installation, page 13).
2. The CN8600 appears as a virtual drive in the laptop's file system. Go to
the drive and locate the Winclient or Javaclient AP. Select the preferred
client and double-click the icon. The AP's connect page will appear. An
example is shown:
3. Select the "USB Mass Storage Device" and click Connect.
110
Advertisement
Table of Contents
