Table of Contents
Advertisement
CN8600 User Manual
3. In the screen that appears, press F1 to set the IP address. Proceed to step 4.
Press F2 to enable the CN8600 to authenticate users. The CN8600 allows
authentication and authorization through external programs. If the external
programs fail to authenticate and you cannot log on to the device, use the
local console to transfer authentication to the CN8600. The following
message displays when the operation is successful.
See Authentication, page 36 for details.
Press the Esc key to exit the local console.
4. When you invoke the OSD, a screen similar to the one below appears:
To move up or down through the list one screen at a time, Click the Up and
Down Arrow symbols (), or use the [Pg Up] and [Pg Dn] keys.
To select or confirm a value, press the space bar [Space].
To dismiss the menu, and deactivate OSD, press [Esc].
128
Advertisement
Table of Contents
