Ip Address Determination; Local Ip Setup - ATEN CN9000 User Manual

IP Address Determination

If you are an administrator logging in for the first time, you need to access the
CN8600 in order to give it an IP address that users can connect to. There are
several methods to choose from. In each case, your computer must be on the
same network segment as the CN8600. After you have connected and logged
in you can give the CN8600 its fixed network address. (See Network, page 29.)

Local IP Setup

Use the local console to set the IP address. All procedures start from the OSD
Main Screen.
1. To display the Main Screen, tap [Scroll Lock] twice.
Note: [Scroll Lock] is the default OSD hotkey. You can optionally change the
Hotkey to the Ctrl key.
The login screen appears:
From this screen, you can select the following options:
 Press F1 to change the hotkey for invoking the OSD screen. You can
change the Hotkey to the Ctrl key instead of the Scroll lock key (shown as
ScrLK in the screen).
 Press F2 to select the video output format for the remote display, which
includes AUTO, DVI and HDMI.
2. Enter a valid Username and Password to continue.
The default username is administrator; the default password is password.
The first time you log in, you must use these defaults. For security
purposes, we strongly recommend that you change the default password to
something unique.
Appendix
127